If and/or how to replace switch on Water Tank panel

Discussion in 'Tech Talk' started by JohnSaw, Nov 19, 2021.

  1. JohnSaw

    JohnSaw
    Expand Collapse
    Member

    Joined:
    Nov 19, 2021
    Messages:
    1
    Likes Received:
    0
    Hi all, I have a missing or broken switch on my KIB Micro Monitor Tank system panel ( Model KIB M28VW).
    I would like to know if I need to change out the entire unit or if it is possible to remove and replace the switch component only. If so, how easy or difficult is it to pull the switch out to find the type of switch to order, and if know where to order (type).
    I attached some Pictures of the panel (KIB M28MW) showing the missing/broken switch when I bought the trailer recently. It is a 2008 33ft Palomino Thoroughbred Travel Trailer.
    Thank you kindly for your help
     

    Attached Files:

  2. mdcamping

    mdcamping
    Expand Collapse
    Member

    Joined:
    Jul 3, 2007
    Messages:
    1,062
    Likes Received:
    588
    Paythebill likes this.
  3. Rollin Ollens

    Rollin Ollens
    Expand Collapse
    Member

    Joined:
    Sep 17, 2007
    Messages:
    527
    Likes Received:
    486
    The pump switch replacement is a pretty easy fix if you are somewhat of a handy kind of guy. It just snaps into place. You need to remove the face plate in order to squeeze the retainers that hold the switch. Make note of where the connections plug in. It is important that yuou get them correct as the toggle switch is lit (three poles).

    Does everythinbg else work on the monitor? If not, then I would do as Miuke suggests. Replace the entire monitor. https://www.amazon.ca/KIB-SWOKLED1-...ocphy=9001547&hvtargid=pla-570241815509&psc=1

    If you scroll down the Amazon link you will find the monitor for sale as well as just the switch.

    Darrell
     
    mdcamping and Paythebill like this.

Share This Page